A leading Gray, S.G. and Alloy Cast Iron Casting Manufacturing FOUNDRY Unit.
Measuring & Calibration Instruments
List of Instruments in our Foundry Unit
| NO. | TYPE OF INSTRUMENT | MAKE | CAPACITY | QTY. |
|---|---|---|---|---|
| 1 | Optima Height Master | Optima | 0.0005mm (0-600mm) | 1 |
| 2 | Granite Surface Plate | Luthia | 630mm X 1000mm | 1 |
| 3 | Surface Plate | Luthia | 300mm X 300mm | 2 |
| 4 | Slip Gauge Box | Yamayo | 0.5 – 100mm | 1 |
| 5 | Filler Gauge | Vetex | 0.001" / 0.025" | 1 |
| 6 | V – Block ( With U clamps) | Mitutoyo | 58 X 58 X 75 mm | 2 |
| 7 | Plunger Type Dial Indicator | Baker | 0.001mm (1mm) | 3 |
| 8 | Plunger Type Dial Indicator | Baker | 0.01mm (10mm) | 4 |
| 13 | Plunger Type Dial Indicator | Baker | 0.0001" (0.200") | 2 |
| 16 | Out Side Micrometer | Mitutoyo | 0.001” ( 0- 1”) | 1 |
| 17 | Out Side Micrometer | Germany | 0.0005" ( 1"- 2" ) | 1 |
| 18 | Out Side Micrometer | Mitutoyo | 0.001” ( 2” – 6”) | 1 |
| 20 | Out Side Micrometer | Mitutoyo | 0.001" (3" - 4") | 1 |
| 19 | Out Side Micrometer | Mitutoyo | 0.001" (7" - 8") | 1 |
| 21 | Radius Gauge | West Germany | 1 to 7 mm | 1 |
| 22 | Radius Gauge | West Germany | 7.5 to 15 mm | 1 |
| 23 | Combination Set | Mitutoyo | 0’ – 180’ | 14 |
| 24 | Comparator Stand | Microflats | 200 X 200 Base | 1 |
| 25 | Magnetic Stand | Samrat | 300 mm Column | 4 |
| 26 | Bore Gauge | Mitutoyo | 35mm – 60mm | 3 |
| 27 | Bore Gauge | Mitutoyo | 50mm – 100mm | 3 |
| 28 | Depth Micrometer | Mitutoyo | 0.001" (2" - 8") | 1 |
| 29 | Vernier Caliper (With Dial Indicator) | Mitutoyo | 0.01" (0 – 12") | 5 |
| 34 | Vernier Caliper ( Digital) | Mitutoyo | 0.001mm (0 – 200) | 2 |
| 36 | Vernier Caliper ( Digital) | Mitutoyo | 0.001mm (0 – 300) | 1 |
| 37 | Vernier Height Guage (With Puppy Dial) | Mitutoyo | 0.02mm (0-300mm) | 1 |
| 38 | Vernier Height Guage (With Puppy Dial) | TBI Nicko | 0.02mm (0-400mm) | 14 |
| 39 | Vernier Height Guage (With Puppy Dial) | Mitutoyo | 0.02mm (0-600mm) | 1 |
Note: The calibrating of instruments like Plug Gauge, thread Gauge, Spl gauges etc is done by the Kirloskar approved calibration agency Tejal Industrial Corporation.